Imagine a factory where people and robots work side by side. To work in coordination, they need shared cues - for example, a sticker on a box that tells a person where to carry it and tells a machine what to do next. The problem is that ordinary colored markers are hard to see in darkness or fog. A joint team from the Korea Advanced Institute of Science and Technology (KAIST) and Yonsei University proposed a solution. The results were published in the journal npj Flexible Electronics.

Researchers led by Professor Yong Min Song (KAIST) and Professor Ki Jun Yu (Yonsei University) developed a flexible reflective display. It does not emit light itself but uses reflected light. A person sees the color change, while a robot with a special camera sees a pattern of areas of different brightness. The camera detects near-infrared light (NIR): radiation invisible to the eye that special sensors pick up.

The key to the technology is the polymer PEDOT. This is a conductive plastic whose ability to absorb light changes when voltage is applied. The more light it absorbs, the darker the screen appears, and vice versa. This effect is called electrochromism - when an electrical signal changes a material's color or light absorption. The scientists combined the polymer with a thin-film optical structure that causes light to reflect repeatedly inside the layers. By adjusting the voltage, both the visible color and the brightness in the infrared range can be controlled.

The prototype is a 4 by 4 matrix - 16 pixels in total. Each is connected to a thin-film transistor (TFT), which works as a miniature electronic switch. This makes it possible to turn pixels on and off individually, creating different patterns. To reduce the risk of leakage, a gel electrolyte was used instead of a liquid one, and the flexible substrate lets the screen bend and conform to curved surfaces.

In tests, the display was attached to the back of a hand and individual pixels were successfully controlled. It continued to work on a curved surface, and an infrared camera recorded the patterns. In addition, the camera recognized the pattern in darkness and in smoky conditions: in darkness the screen was illuminated with infrared light, and the camera picked up the reflected patterns even without visible lighting.

For now this is only a small laboratory sample. Displaying more information will require increasing the number of pixels. Durability also needs to be improved for prolonged operation and repeated bending, and the data read by the camera must be integrated into robot control systems. The authors see applications for the technology in "electronic labels" for smart factories, wearable devices and equipment with curved surfaces.

"The significance of the work is that we were able to show on a single flexible display both color information for humans and a near-infrared signal for machines," Song noted. "We hope the technology will develop into a platform that effectively conveys information under different lighting where people and robots work together." Yu added: "By combining flexible transistors with electrochromic devices, we achieved independent control of each pixel. Now the goal is to scale the technology to large matrices."

Source: Tech Xplore