Engineers from the University of Surrey (UK) and its spin-off company Z-PULSE have developed a model that predicts how much electricity small generators can produce from vibrations - for example, from a person's movement. The work was published in the journal Advanced Energy Materials. In the future, this could help create wearable devices that depend less on batteries.

The basis is triboelectric nanogenerators (TENGs). These are devices that generate current when two materials come into contact and separate - similar to the static electricity that arises if you rub a balloon against a sweater. After contact, the surfaces receive a charge, and when they are separated the charge begins to move through a circuit. TENGs are lightweight, flexible and work even with slow and uneven movements. But predicting their output was difficult: many models treated such generators only as electrical components and did not account for their mechanical motion.

The team created a so-called lumped electromechanical equivalent circuit - a single model that describes both the mechanics and the electrics of the device. It accounts for mass, stiffness, energy losses, electrostatic forces, the changing gap between charged surfaces and the connected load. This allows engineers to trace the entire path from vibration to electrical output and understand where energy is gained, transferred or lost.

The main conclusion: tuning the device to the right vibration is more important than optimizing materials or electrical components separately. In simulations, changing the mass of one of the samples by just 3% knocked it out of resonance - the frequency at which the device naturally oscillates most strongly - and peak power fell by about 60 times. The reason is that matching the device's natural frequency to the frequency of surrounding vibrations amplifies the motion and increases output, much like pushing a swing in time increases its height.

"For energy-harvesting technologies to move from laboratory demonstrations to practical autonomous systems, it is necessary to understand the full interaction of materials, mechanics and electrical output. This work provides a systems-level foundation that connects these areas and opens the way to more intelligently designed self-powered technologies," Ravi Silva, professor and director of the Advanced Technology Institute, said in a press release.

The researchers also tested whether the electrical signal could carry information about motion. They mounted a TENG on a bicycle and recorded the response on smooth, uneven and gravel roads. Each surface produced its own signal pattern. A machine-learning model recognized the surface type with 96.7% accuracy. This means that a single device could potentially both harvest energy and act as a sensor - for example, in future autonomous monitoring systems.

"A self-powered system becomes much more interesting when its signal is viewed not only as electricity. The waveform also contains information about the mechanical environment that produced it. This opens the possibility for future devices that can harvest energy from the surrounding world and sense it at the same time," explained PhD student Saiyib Roy.

Note that this concerns a laboratory model and simulations, not a finished commercial product. The researchers have not yet reported when such devices might reach the market.

Source: Tech Xplore