Purifying water of dyes that are not retained by conventional filters is a labor-intensive task: absorber substances are needed, and then the water has to be centrifuged for a long time. Researchers at the Vienna University of Technology (TU Wien) have found a simpler path: dyes attach to magnetic particles, and they can be pulled out with an ordinary magnet. The work was published in the journal Advanced Sustainable Systems.

The main feature of the method is that the magnetic particles themselves are made from waste that would otherwise require costly disposal: electronic scrap and old batteries. "The idea is to turn what is considered garbage into a valuable material," explains Professor Guenter Rupprechter from the Institute of Materials Chemistry at TU Wien. "Spent batteries contain metals that are potentially harmful if handled improperly, but they can also serve as building blocks for functional materials."

Zinc was extracted from alkaline batteries, nickel from nickel-metal-hydride (Ni-MH) batteries, and iron from rusty iron scrap. Nanoparticles were synthesized from these metals: some consisted of pure zinc ferrite, others of zinc ferrite with an admixture of nickel-doped iron oxide. Nanoparticles are tiny objects measuring billionths of a meter.

Tests were carried out on Congo red, a synthetic organic dye often used in research as a model wastewater pollutant. Such dyes are poorly removed because of their stable molecular structure and persist for a long time in water bodies. The nanoparticles bind dye molecules on their surface. The material with nickel (ZnF-Ni) performed especially well: thanks to stronger magnetic properties, the particles with the pollutant separated from the water much faster.

"For practical purification, the magnetic properties of nanoparticles are just as important as their ability to bind pollutants," says Dr. Kaisar Makbud, the first author of the study. "By modifying zinc ferrite with nickel, we obtained a material with noticeably better magnetic properties. This allows the nanoparticles to be extracted much faster - simply with a magnet, without centrifugation."

In the laboratory, the entire removal and separation process took about 5-15 minutes. The team also tested the approach on a flow-through prototype: contaminated water was pumped through a glass tube surrounded by an external neodymium magnet. The magnet held the absorber nanoparticles at the tube wall, while the purified water flowed on. Within 25 minutes the water became visually clear, and the nanoparticles could be recovered almost completely. "If the absorber is captured directly from the flow, complex separation procedures are no longer needed - this opens the way to continuous water purification," explains Professor Michael Stoeger-Pollach from the TU Wien University Service Center for Transmission Electron Microscopy (USTEM), who studied the local magnetic properties of the materials using electron magnetic circular dichroism (EMCD). According to the authors, the pollutant itself can also be recovered for reuse.

What lies ahead is improving the process to increase the share of recovered materials. It is also important to ensure that the nanoparticles themselves do not release pollutants into the water. The method is planned to be tested on large volumes of wastewater under conditions close to real treatment plants.

Source: Phys.org