Engineers at the Massachusetts Institute of Technology (MIT) have unveiled a tiny flapping-wing flying robot that is the first of its kind able to carry sensors and a computer for navigation. Previously such devices could fly only in a laboratory, where their position was tracked by external cameras. Now the robot does without that support: in a demonstration it flew along a complex trajectory and landed precisely on a sunflower. The results were published in the journal Science Robotics.

The robot weighs less than a paper clip and is comparable in size and shape to a microcassette. Its wings are driven by soft actuators - artificial muscles that contract quickly and make the wings flap. To lift the electronics, the researchers increased the size of these muscles by 50%, while carefully tuning their length and radius so that lift increased by 46%. As a result, the lift-to-weight ratio reached 1.9 - enough to carry an electronics unit weighing just 244 milligrams.

On board are an inertial measurement unit (a sensor that determines orientation and angular velocity), an optical flow sensor (which helps estimate speed and position from image displacement) and a time-of-flight sensor (which measures altitude from the signal return time). However, without an external motion-capture system the robot does not know its absolute position and can drift off course. To cope with this, the team developed an algorithm that computes orientation and position very quickly, simplifying the calculations. It turned out that frequent data updates matter more than more accurate but slower ones.

In tests the robot hovered at various altitudes and followed waypoints, with a position error of just a few centimeters. Using a joystick, an operator set its coordinates, and the craft flew around several plants and then landed gently on a sunflower. The electronics consume only about 6% of all the energy; the rest goes to operating the artificial muscles and wings.

The authors stress that the robot remains connected to an external power source, so fully autonomous outdoor flight is not yet on the table. Nevertheless, the demonstration shows the potential of such devices for precision agriculture - for example, for artificial pollination in regions where natural pollinators have suffered from habitat loss, or for monitoring plant health without damage. In the future the researchers plan to add a camera for object recognition and obstacle avoidance, and to integrate power electronics and batteries so that the robot can fly without wires.

Source: Tech Xplore