Perovskites and related materials (perovskitoids) are considered promising semiconductors for solar cells, LEDs and photodetectors. Their properties depend on composition and internal crystal structure. Researchers from Northwestern University (USA), led by Olivier Chevalier and Chad Mirkin, developed a 2-centimeter chip containing about a million tiny crystals. Each crystal has its own composition and position on the chip, which makes it possible to study many materials at once. The work was published in the journal Advanced Materials.

To create such a chip, a removable polymer coating with a million microscopic wells was applied to a glass substrate. Then different precursor solutions (starting substances for synthesis) were sprayed into the four corners of the chip. The solutions overlapped, creating smooth changes in composition. The mixtures varied the proportions of cesium, bismuth, antimony, bromine and iodine. Four such chips covered a wide range of compositions.

After heating, crystals about 10 micrometers wide formed in the wells. By removing the polymer, the scientists obtained an ordered array in which each position corresponded to a specific composition. Crystals of this size provided enough material to measure light absorption and X-ray diffraction (a method that shows the arrangement of atoms). The researchers mapped hundreds of positions, averaging signals from neighboring crystals.

The resulting maps linked structure to band gap - the energy threshold needed to excite electrons in a semiconductor. The smaller this threshold, the lower-energy light the material can absorb. In well-known lead-based perovskites, replacing iodine with bromine usually increases the band gap. However, in the new mixtures, adding bromine first increased it, then sharply lowered it, and only then did it rise again.

Chemical mapping and electron diffraction revealed bromine-rich cores surrounded by iodine-rich shells. In the core, atomic blocks joined into layers, while in the shell they joined into isolated pairs. The layered core holds electrons less tightly, lowering the energy needed to excite them. This explains why the core can have a smaller band gap despite a higher bromine content.

Observations of crystal growth confirmed a two-stage process: first, bromine-rich material crystallized rapidly, forming the core, and then an iodine-rich shell grew more slowly. Calculations showed that the separation becomes more favorable as the antimony content increases.

The maps also revealed a practical trade-off. The composition with the smallest measured band gap contained two structural phases. Other recipes produced a single phase. In a 10-day test in humid air, unprotected iodine- and antimony-rich regions degraded first, while bromine-rich regions remained stable. A protective polymer coating significantly reduced degradation.

According to the authors, mixing bismuth and antimony provides a way to balance functionality and stability. The study did not test a solar cell. It provides a more complete basis for selecting candidates: a favorable absorption measurement may be determined by one part of the crystal, hiding a second structure with different properties. The work shows why simply changing ingredients is not enough - the arrangement of atoms can reverse the expected optical result.

Source: Phys.org