Hydrogen can replace fossil fuels in heavy industry, so creating sustainable technologies for its production is important for the transition to clean energy. One of the most economical methods is solid oxide electrolysis (SOEC): it requires less electricity than other water-splitting technologies. But such installations place high demands on materials.

Researchers from the Department of Chemistry and Chemical Engineering at Chalmers University of Technology, led by Professor Jan Froitzheim, have prepared a review article bringing together current knowledge about the weak point of these systems. The work was published in the journal Progress in Materials Science.

In SOEC installations, individual electrolysis cells are connected into a stack. A key role is played by metal interconnects - plates that connect the cells and prevent hydrogen and oxygen from mixing. The steel for them is designed for high temperatures but corrodes over time. Corrosion is the gradual destruction of metal under the action of the environment. It reduces the efficiency and service life of the system and hinders its large-scale deployment.

The authors not only summarized scattered data but also took into account the experience of manufacturers. In preparing the review, they received feedback from interconnect specialists at three European companies that produce SOEC systems. This helped link fundamental science on materials and corrosion with the real requirements that arise when assembling electrolysis stacks.

The researchers also analyzed what can be borrowed from solid oxide fuel cells (SOFC). In them, the reverse process takes place: the chemical energy of fuel is converted into electricity and heat without combustion. SOFCs have been studied for much longer, so more data has been accumulated on them. The review shows under which conditions knowledge about fuel cells is applicable to electrolyzers, and when it needs to be adapted to different operating parameters.

One conclusion: there is no universal "best material." The optimal choice depends on temperature, atmosphere and other process parameters. Economic aspects of production are no less important. The cost of the technology, and therefore its competitiveness, depends directly on materials and coatings. Therefore, cheaper materials that retain strength are needed.

The review also showed that some areas are already well studied - for example, corrosion on the oxygen side. Others, including the hydrogen side, require further research. Froitzheim separately highlights corrosion caused by hydrogen. In the Nordic project MoreH2, which he leads, scientists cooperate with a steel manufacturer, a coatings supplier and an SOEC system manufacturer.

According to the professor, progress requires all participants in the chain, since combinations of materials must be considered, not each one separately. Materials must also be suitable for large-scale production. Meeting demand for sustainable hydrogen will require electrolysis on a gigawatt scale - and that means millions of interconnects. The technology is developing rapidly: plants with a capacity of several megawatts are currently being built. Ultimately, the best material will be the one that makes it possible to deploy the technology and thereby reduce carbon dioxide emissions.

Source: Tech Xplore